Electrical · Troubleshooting
GFCI Outlet Won't Reset
A GFCI that refuses to reset is either not getting power, detecting a fault, or at the end of its life.
Common causes
No power reaching it
GFCIs generally won't reset without power — check the breaker first.
A fault downstream
Moisture in an outdoor outlet or a damaged cord on the protected circuit keeps it tripping.
Worn device
GFCIs age; an old one may stop resetting cleanly.
What you can safely check
- Unplug everything on the circuit and try reset again.
- Confirm the breaker is fully on.
- Check exterior outlet covers for water after rain.
Stop and call a professional if
- It trips with nothing plugged in.
- You see scorching or feel heat at the outlet.
- Water has reached an outlet box.
What a visit covers
- Confirm power and isolate the fault
- Replace the GFCI device if it has failed
- Refer circuit faults to a licensed electrician
This is handled as part of gfci installation in Atlantic & Cape May Counties. Work that requires a licensed electrician, plumber or other specialty trade is identified up front and referred out.
Want it looked at?
Send a short description and a photo. We will confirm whether it's in scope and what it should take before scheduling.
