Skip to main content
Electrical · Troubleshooting

Outlet Not Working

A dead outlet isn't always broken — it may be downstream of a tripped GFCI somewhere else on the circuit.

Common causes

  • Tripped GFCI elsewhere

    One GFCI in a bathroom, garage or outside can protect other outlets, so they all go dead together.

  • Tripped breaker

    A breaker can trip partially and look like it's still on.

  • Worn or loose device

    Old outlets with loose grip or backstabbed wires can fail intermittently.

What you can safely check

  • Press reset on every GFCI outlet in nearby bathrooms, kitchen, garage and exterior.
  • Check the panel for a breaker sitting between on and off; switch it fully off, then on.
  • Test the outlet with a lamp you know works.

Stop and call a professional if

  • The outlet is warm, discolored, buzzing or smells like burning.
  • A breaker trips again immediately after resetting.
  • Several unrelated outlets or lights are out.

What a visit covers

  • Trace the problem to the device or the circuit
  • Replace worn outlets on the existing circuit
  • Refer wiring or panel faults to a licensed electrician

This is handled as part of outlet replacement in Atlantic & Cape May Counties. Work that requires a licensed electrician, plumber or other specialty trade is identified up front and referred out.

Want it looked at?

Send a short description and a photo. We will confirm whether it's in scope and what it should take before scheduling.